Small Block Chev 327 350 400 212cc Aeroflow Performance Aluminium Cylinder Heads with 66cc Chamber (Pair)

Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.

The cylinder head sits on top of the engine and seals the top of the engine’s cylinders creating the combustion chamber – the place where the fuel and air mixture is burned. The passages in the cylinder head – known as the ports, allow for air and fuel to flow into the cylinder and exhaust gases to flow out of it. The head also channels coolant into the engine block, cooling down the engine components. It’s also the housing for the valve gear, springs, lifters, and spark plugs.

Most OEM cylinder heads are made from cast iron which is durable and cheap to manufacture, but heavier and not efficient at dissipating heat.

The Aeroflow Performance aluminium cylinder heads utilise high-quality ultra-smooth A356-T6 aluminium castings and new as-cast runner and chamber designs that produce increased power & torque, improved efficiency, and excellent flow numbers.

Designed for both street and race performance engines, the 5-angle competition valve job, diamond-honed bronze guides, hand bowl blending and professional assembly help the Aeroflow series of aluminium cylinder heads to outperform some of the best brands in the business.

These heads are ideal for operating in the idle to 7500rpm range, and will fit a 4.00" bore or larger.

Specifications:

• Part number: AF95-0400
• Material: A356-T6 Aluminium
• Chamber: 66cc
• Intake Port Volume: 210cc
• Intake Port Dimension: 2.21" x 1.30"
• Exhaust Port Volume: 72cc
• Exhaust Port Dimension: 1.42" H x 1.53" W
• Exhuast Port Location: Raised .250"
• Spark Plug Location: Angled
• Intake Valve Diameter: 2.08"
• Exhaust Valve Diameter: 1.60"
• Valve Stem Diameter: 8mm
• Valve Spring Pocket I.D.: 1.57"
• Valve Guide Material: Bronze
• Valve Guide O.D.: .502" (.560" at base)
• Rocker Stud Thread Size: 7/16" x 14
• Valve Angle: 23°
• Deck Thickness: .750"

 

Fitment notes:

• It’s recommended to check the installed spring seat pressure & open pressure before installing your cylinder heads to make sure the spring pressure is correct for your application.
• Will fit a 4.00" bore or larger.
• Suggested Components
  • Head Gasket: Fel-Pro 1003
  • Intake Gasket (1.34 x 2.21 Port Size): Fel-Pro 1206
  • Exhaust Gasket (1.55 x 1.55 D Port Size): Fel-Pro 1405
  • Head Bolts: ARP 134-3601 or 134-3701
  • Head Studs: ARP 134-4001 or 234-4301
  • Spark Plugs (14mm x 3/4" reach with flat gasket seat): Champion RC9YC