Proflow Pro Relocation Ignition Lead Set Black for Holden Chev LS V8 LS1 LS2 LS3 L98 L76 L77 Straight Spark Plug Boots 8.8mm Spiral Core w/ Separators

Designed and engineered in-house, Proflow products are manufactured to the highest of standards. Proflow products are computationally optimized and tested within their own engineering department. Rapid prototypes are created to guarantee perfect fitment, as well as pleasing aesthetics. Proflow take pride in every part they make. Remember, Proflow are the leaders in performance products!

Proflow’s Holden/Chev LS V8 relocation ignition lead kits feature high-temperature silicone outer jackets and insulation, along with a fibreglass braid for more pull strength. These are perfect to use if you have decided to relocate your LS style coil packs away from the engine to a different location in the engine. They come with lead separators and black silicone boots.

For those who want to design & route their spark plug wires, Proflow Spark Plug Pro 8.8mm Wire Sets have spark plug terminals and boots installed with the opposite ends open. Distributor cap terminals and boots are included so you can cut wires to desired lengths; use any commonly available ignition lead crimping tool to complete the assembly.

The Proflow Spark Plug Pro 8.8mm Wire is "the" performance wire. Engineered from the inside out, the 8mm offers everything you have ever wanted in a wire; low resistance and heavy duty strength! In a single 12 inch length of Proflow Wire there is approximately only 500 ohms of resistance. To accomplish this, Proflow use their own bespoke conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core.

The outer sleeve that surrounds the conductor assembly is just as impressive. A tough, 8.8mm proprietary blend of silicone and synthetic material, combined with an extra heavy fibreglass braid for more pull strength, produce a sleeve that is highly resistant to high heat as well as abrasion and tears. A dielectric insulator keeps the current guided to the plugs.  Underneath the high-temperature boots, dual crimp terminals feature snap-locks to ensure a secure fit.

Supplied complete with Proflow Billet Lead Separators.

Specifications:

• Proflow Spark Plug Pro LS V8 Relocation Ignition Lead Kit
• Part Number: PFEIGLSRE88-BK
• 8.8mm wire so you can cut to your desired length
• High-Temperature Silicone Outer Jackets and Insulation
• Fiberglass Braid for more pull strength
• Snap Lock Terminals for a positive fit
• Assembled: No
• Diameter (mm): 8.8mm
• RFI Suppression: Yes
• Wire Colour: Black
• Coil Terminal Ends: Stock
• Coil Boot Colour: Black
• Coil Boot Material: Silicone
• Spark Plug Boot Ends: Eight Straight
• Spark Plug Boot Colour: Black
• Spark Plug Boot Material: Silicone
• Coil Wire Included: Yes
• Conductor Style: Spiral core low resistance
• Quantity: Sold as a set to suit V8 vehicles
• 12 Month Warranty

Fitment Notes:

• You cut these to length to suit your application.
• Use with a commonly available ignition lead crimping tool to complete assembly for example Proflow PFEIGCRIMP (available separately).
• Supplied complete with Proflow Billet Aluminium Ignition Lead Separators ensuring the long life and safety of your leads and a picture perfect installation.