MSD 31239 V8 Universal Lead Set 90* Boot 8.5mm Super Conductor Spark Plug Leads

$324.50
RRP $368.15
SAVE $43.65 (12%)
In Stock




MSD 8.5mm Super Conductor Ignition Leads
Universal DIY Kit, suitable for V8 with 90° Plug, Socket/HEI Cap


For those who want to design & route their spark plug wires, Red Super Conductor Universal 8.5mm Wire Sets have spark plug terminals and boots installed with the opposite ends open. Distributor cap terminals and boots are included so you can cut wires to desired lengths; use the included mini-stripper crimper to install terminals. 2-in-1 Wire Sets include terminals and boots for both socket and HEI-style distributor caps.

The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit.

Specifications:

 

  • Extra long 8.5mm wire so you can cut to your desired length
  • Overall Length of Leads are; Coil Lead - 80cm, 2 x 81.5cm, 2 x 107cm, 2 x 127.5cm, 2 x 142.5cm
  • Includes both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper
  • Part NumberL MSD 31239
  • Brand: MSD
  • Description: MSD 8.5mm Super Conductor Igntion Lead set
  • Assembled: No
  • Diameter (mm): 8.50mm
  • RFI Suppression: Yes
  • Wire Color: Red
  • Distributor Terminal Ends: Male/HEI and Female/Socket
  • Distributor Boot Color: Gray
  • Distributor Boot Material: Silicone
  • Spark Plug Boot Ends: Eight 90 degree
  • Spark Plug Boot Color: Gray
  • Spark Plug Boot Material: Silicone
  • Coil Wire Included: Yes
  • Conductor Style: Spiral core
  • Quantity: Sold as a set to suit V8 vehicles
  • 12 month warranty

Fitment notes:

 

 

  • You cut these to length to suit your application, special tool for assembly is included

 

SKU N2085
Barcode # 85132312399
Brand MSD Ignition
Shipping Weight 1.4000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other Tuff Car Parts users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category